HybO2 offers a wide selection of high grade supporting equipment to ensure your hyperbaric oxygen therapy chamber is simple and efficient to use whilst maintaining the high level of engineering and maintenance upon which HybO2 prides itself
Specifications will vary according to the model fitted. Model may vary.
Dimensions
Width – 295mm Height – 560mm Length – 750mm Weight – 22.5kg
Operating pressure 7.0 bar absolute
Operating capacity 170 lpm
Specifications will vary according to the model fitted. Model may vary.
HybO2 has identified a minimum of one concentrator per chamber occupant, sometimes more are required.
Dimensions
Width – 450mm Height – 1050mm Depth – 800mm Weight – 102kg
Operating pressure 4.5 bar absolute
Output ≈ 17 Ipm under test
Purity ≈ 93% ±3%
Power Consumption 1800W
Specifications will vary according to the model fitted. Model may vary.
These act as the Human Machine Interface (HMI) and come with their own built-in compressor negating the requirement for a separate compressed air supply.
Dimensions
Width – 500mm Height – 1200mm Depth – 510mm Weight – 102kg
Operating pressure 4.5 bar absolute
Operating capacity 170 lpm
Specifications will vary according to the model fitted. Model may vary.
Some chillers only cool down the air as it comes from the
compressor. HybO2 upgrades all our chillers to allow for cooling of the chamber atmosphere whilst under pressure.
This Oro-Nasal Mask is moulded from silicone rubber. The anatomically shaped design aids a leak free comfortable fit secured by the 5 strap adjustable headgear.
This is our most efficient mask and it relies on a close fit. Due to the amortising effect of the silicon there is a slight delay on inhalation. For this requiring absolute integrity of oxygen
delivery this is the go-to mask. The mask is soft enough to pinch the nose to equalise through the silicon. It is easy to clean and available in five sizes.
A lighter more comfortable fitting unit with an integrated head strap, this is our most popular mask for frequent users. It is easy to pull away from the face to pinch the nose for ear equalising.
As the mask is less contoured exact fitting is not so important and the same sized unit can be used for different sized patients.
Please fill out the form below to receive further information about purchasing a HybO2 hyperbaric chamber
We aim to provide the quickest technical intervention in the industry. We are able to service your equipment within two days to a week within the UK. Manufactured under modern standards in the EU (x-ray, ultrasound and dye penetrant liquid inspections = DPI) and conform to our high standards of efficiency and safety. For safety reasons, all chambers are tested during production to a maximum of 1.25 x the maximum working pressure.
Our chambers are for commercial use only and considered as non-medical as they do not operate pressures greater than 2 bar absolute and are not used for the treatment of decompression illnesses sometimes found in divers and cassion workers.